In several places in the KXPA100 Assembly Manual, including diagrams and
the inventory, reference is made to spacers 1/4" (6.4 mm) long. The
inventory lists 24 of these in the kit. It seems that the size should be
specified as 1/8" (3.2 mm). This is the size I have measured for the
spacers supplied.
One spacer and a split-ring lock washer are to be fitted onto a 4-40
5/16" (7.9 mm) pan head screw when assembling the U-cover, end plates
and the corner feet/bumpers. This combination looks like it would do the
job, with a few mm of thread exposed to screw into the U-cover or heatsink.
If the spacers are truly meant to be 6.4 mm long, there would be
insufficient thread exposed for attachment.
I have not found any reference to this anomaly and thought the question
should be asked.
Regards,
Bernie.
VK2WJ.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
