Thanks, Don.
The labelling error probably has not bothered anyone else but I like to
have the procedure clear before getting in too deep. I have built the
amp since my posting yesterday and on the bench it is working nicely
into a dummy load. Having the KXPA Utility running on the computer while
testing is a handy feature that I was not expecting.
Bernie.
VK2WJ.
Message: 5
Date: Wed, 07 May 2014 08:20:26 -0400
From: Don Wilhelm<[email protected]>
To:[email protected]
Subject: Re: [Elecraft] [KXPA100] Inventory question - spacers
Message-ID:<[email protected]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Bernie,
Yes, the length is 1/8 inch (3.2mm). I guess someone had a magnifier
when the manual was written .
Look for an*errata* coming to the Elecraft website soon!
73,
Don W3FPR
On 5/7/2014 2:45 AM, Bernie Wills wrote:
In several places in the KXPA100 Assembly Manual, including diagrams
and the inventory, reference is made to spacers 1/4" (6.4 mm) long.
The inventory lists 24 of these in the kit. It seems that the size
should be specified as 1/8" (3.2 mm). This is the size I have measured
for the spacers supplied.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
