Good Weekend All,
Don't have easy access to search the archives, so at risk of a dup, here
is a "finding" from setting up the KX3, SignaLink with the KX3
Tigertronics made cables, and DM780. HRD works flawlessly with Elecraft
KXUSB here, but...
Using the little paper instruction insert that came with the SL to KX3
cables from Tigertronics, it was implied that the KX3 menu entry for
MicBtn was to be in PTT Up.Dn. Well, that is apparently backwards. The
system behaves normally if Mic Btn is OFF, and when set as instructed in
the little sheet, the outgoing data string is transmitted in your
selected mode, then the SL unkeys (as it should), but the KX3 stays in
transmit.
When the KX3 is set as the TigerTronic folks suggest, I assume the SL
vox relay was being "overruled" by the TX command by KXUSB control
because tapping the XMIT button on the rig would drop the rig back into
receive. With PTT set OFF, the SignaLink VOX circuit has proper control.
Had me stumped for a minute.. hope this helps someone setting up in the
future.
Jack - KD4IZ
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
