I while back I figured out how to do macros in N1MM to key the K3 and KX3 internal keyer and DVR. I posted my summary macros here: http://ellmore.net/na1dx/?p=469
The only issue is cancelling the execution of a macro. You can not use the normal "ESC" key to cancel a TX like you might do with N1MM using WinKey CW keyer or MMVARI/MTTY/FLDIGI. For non SSB modes, you need to use an external key attached to the K3/KX3. I use a straight key and just give it a quick tap. For SSB, just hit the PTT on a mic or external PTT connector like a foot paddle or hand switch. I also use similar macros with NaP3 now to work PSK/FSK/CW/SSB without any other decoder software other than the decoder built into the K3/KX3. I run Ham Radio Deluxe (without the Digital Master 780) and NaP3 as my non-contesting setup and have no issues. 73, Doug Ellmore, NA1DX [email protected] www.ellmore.net/na1dx ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
