I know that it's "best practice" to use DATA A mode for digital, but I use Winmor all the time in SSB mode and don't run into any problems. I don't even bother turning off the compression and EQ, either. Have you tried it this way, and if so what has your experience been?
Tim AE6LX On Fri, May 16, 2014 at 7:54 AM, K7JLTextra <[email protected]> wrote: > I run Winmor on my K3 & KX3 and find it very frustrating that Winmor > resets the mode back to SSB with each automatic frequency change. I need > the mode to be set to DATA A so that the compression & Equalizers are > disabled, ALC is optimized, and for the K3 the rear panel connectors are > enabled. Are there other Winmor user that would like to see the WL2K > development group make some changes to fix this problem? > > John Hendricks K7JLT > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > -- Owner, worldwidedx.com AE6LX, Amateur Radio NNN0ITA, Navy MARS NNN0GAF FOUR, Southern CA Director Assistant for Training, Navy MARS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
