http://www.elecraft.com/manual/KX3-2M%20FAQ.htm
"*Q:* *What is the frequency stability?* "A: Standard (uncompensated) frequency stability is sufficient for FM or AM operation. For CW/SSB/data use, it will be necessary to perform the KX3's extended VFO temperature compensation procedure, providing typical stability of about ± 10 Hz on 2 meters. This range is compatible with 170-Hz-shift RTTY but is not compatible with many narrowband modes, including JT65 and WSPR.wband modes, including JT65 and WSPR." -- Phil kj6pon On Mon, May 19, 2014 at 12:36 PM, Ron <[email protected]> wrote: > Hi, > > Is any special calibration required, specifically the Temp Compensation > required for basic voice FM/SSB use when installing the 2M option? > > > > 73 > > Ron > > AF1Q > > > > > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
