Hi Andy, Make sure you have the latest firmware on your KAT500. I am many others had similar issues and we're resolved with the firmware. 73s Tom Va2fsq.com
-------- Original message -------- From: ANDY NEHAN <[email protected]> Date: 20/05/2014 08:44 (GMT-05:00) To: [email protected] Subject: [Elecraft] Meaning of KAT500 flashing Auto light I am having some problems with my understanding of the KAT500. I have a K3 and an ACOM1000 linear. On 40m when I operate data modes or AM (purely for testing purposes) all is well the units work well together. I can happily run up to 400 watts and as is well. My 40m OCFD has an SWR of about 1.2:1. But when I operate SSB things go "odd". For no apparent reason the KAT500 starts to retune part way through and over and enters a fault condition (on the same frequency as I was using for data - so there is no frequency change involved) and the Auto button flashes. Now I have looked in the manual and cant find the meaning of the flashing Auto LED. Can someone advise me please. I know its me but I am puzzled. Andy K36990 P3 2493 KAT500 1245 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
