Thanks for pointing out my error Dave. I wasn't looking closely enough, and that makes it much better. I'll modify my proposal:
I'll order three sheets for $110, so $37 each sheet with three boards. If two others will agree to buy a sheet of three boards for $37, I'll do it. Chip On Tue, May 27, 2014 at 1:42 PM, Dave KW4M <gene...@bellsouth.net> wrote: > It does not have to be that expensive. > > The boards can be purchased using their 4-layer MiniboardPro service. The > current cost is $98 plus $9.85 shipping for three identical panels. > > Each panel contains three MAB boards. So the cost per MAB board would be > $11.98. > > I used a shear to cut out the individual boards. I believe Tom used a band > saw. > > If there was sufficient demand it would make sense to convert the layout to > use industry-standard Gerbers and place a larger order from a regular board > house. The cost would then be very low. > > 73, > Dave > > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K2-MAB-anyone-picking-this-up-tp7589489p7589572.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to lightdazz...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
