Jim,
Are you referring to the two screws that hold the voltage regulators to
the side panel? If so, the major problem with them is reinstalling the
lockwasher and nut on the one toward the front (unless you have a proper
'crooked tool' to hold the nut from the side without it twisting -
pliers will work if you have patience.
I do have to ask -- what did you do the break the APP housing, they are
pretty sturdy things.
73,
Don W3FPR
On 5/31/2014 6:48 PM, Jim Brown wrote:
The plastic housing of the black power pole that is captive to the
radio is broken, so I'm trying to take it apart to repair it. I
started taking the right side panel off, removing all the perimeter
screws, but there are two in the middle of the side panel, and six
years after building these radios, I don't remember what I can remove
without having a problem. This radio is my spare, minimal stuff in
it. K3/100, no tuner, no 2nd RX.
Suggestions?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
