Larry,
The Microham mk2r+ will do exactly what you want to accomplish. If both
rigs are on the same frequency, neither will transmit.
It is, however, an expensive solution. I was lucky and picked up a used
one at a very good price.
Rich - N5ZC
On 5/31/2014 11:04 PM, Jeff via Elecraft wrote:
My station consists of two K-3's, each with a dedicated legal limit amplifier
and SteppIr antenna. To minimize interference between bands I am using Array
Solutions Bandpass filters. However, if both rigs accidentally wind up on the
same band I run the risk of overloading the front end of the opposite rig and
damaging the receiver (which I've done once...). Does anyone have a way of
taking the band data information and disabling transmit capability on both rigs
if they are on the same band? How are others using SO2R avoiding same band
transmission and subsequent receiver damage? Anyone have any experience with
the Array Solutions AS-RXFEP front end protector?
Thanks,
Jeff Larimore
K0RG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
