Greetings -
I recently assembled and installed the W-2 SWR/wattmeter.
Background:
I have several antennas. I have an A/B switch to select either a
vertical, or one of several dipoles further selected using a remote coax
switch. The sensor is on the branch with the vertical. I use a linear
amp at 500 watts when net control for a Brand X rig owners' net.
Question/Problem:
When using the vertical, the meter works on the A side of the switch
works properly. But, using any of dipoles, on the B side of the switch,
it goes crazy and all the diodes light up. It only does this when the
amp is on line. I tried re-routing the sensor cable with no advantage.
Any ideas? Thanks in advance.
===================== K8JHR ========================
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com