Good job, Mike. Caps are pretty easy to mix up;
I've done that several times.
Phil W7OX
On 6/7/14, 12:54 AM, Michael Eberle wrote:
Aha, I think I found it. It appears that I have
swapped C14 (22uF) with C50 (2.2uF).
On 6/6/2014 11:09 PM, Michael Eberle wrote:
I still have problems with the audio. I set
the dial frequency to 14200.00 USB and transmit
a 700Hz tone. Monitoring the transmitted
signal with my K3 and P3 this is what I see.
The expected spike at 14200.70, another shorter
spike at 14.201.40, and another small spike at
14.202.10 -- exact multiples (harmonics) of the
original 700Hz tone. These spikes show up on
all bands but 20 is the only band I have
actually used the P3 markers to measure.
Thanks,
Mike - KI0HA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
