Hi all, For those who didn't go to Sea Pac and see the new options here is a visual report. The 2/4m option is the credit card size mounted on the ATU module. It's not much over 1/8" in thickness. I don't know if it was the 2m or 4m option. Suspect it was a 2m. The PX3 looks like shrunken P3. The front looks the same just smaller. The I/O is on the left side with lots of ports. The cabling needs to have right angle plugs on both ends as the units will be spaced out quite a bit. I was able to get Dick to open the PX3 to check out the internals. NO batteries external power only. There is some room inside, but who knows what other options will go inside? Like the P3 when first introduced maybe in the future Ext monitor card. There was two boards inside one next to the screen and another smaller card for power and I/O. The power uses the similar plug and cable used on the KX3. The display wasn't bright, it was in a bright building. 73 Jim H K7SSS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
