I have connected the receive line from the transverter to the Transverter In BNC connector on the back of the rig. When I set that transverter to a low power setting the receive works fine, but there is insufficient power to drive the separate transmit line to the transverter.
When I choose H2.5W, I can drive the transmit via the Ant1 socket, but the Transverter In socket seems disabled, so recieve no longer works. How do I configure the K3 so that I get 2.5W drive out and a separate receive IF line which works? -- View this message in context: http://elecraft.365791.n2.nabble.com/Interfacing-an-old-MM-transverter-tp7590240.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
