Hi Steve,
I had the slider at about 25% and I moved it all the way to the left.
Still no change.
73,
Tony L. (KJ5XF)
Tony…
There is a SQUELCH slider near the top above the receive window (grayish
horizontal bar moving). My slider was in the middle and when I moved the slider
to the left all the way, I had solid copy. Where is yours set at?
73, Steve K6SAB
On Jun 24, 2014, at 6:47 PM, Tony Lyon <[email protected]> wrote:
Folks,
I decided to try HRD/DM780 for first time after using another HF digital
software program for
probably 10 years. I am using an Elecraft K3 and a SignaLink USB interface and
both
MixW and MultiPSK fine with ZERO problems on either RX or TX. With HRD/DM780
(version 6.2) the K3
will TX fine (great signal reports), but on RX (with the Audio input set
between 50-60%), I only get about
90% copy even with a solid OLIVIA signal in the waterfall. I have tried all
kinds of SYNC/TUNE Margins
(while using OLIVIA) to no avail. I have also tried all different levels of
audio RX input to no avail.
If someone could share their SignaLink and any K3 LINE-IN/LINE-OUT config
values to get DM780 to work I
would appreciate it. I have been at this for a week (part time) and still can't
get DM780 to work correctly
with my K3.
There is clearly a parameter I am missing, but the documentation for setting up
the soundcard for version
is 6.2 is a tad vague.
73,
Tony L. (KJ5XF)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
