Jim, The K3 uses up-conversion 6 m, which inverts the sidebands. It should stay in NORM data mode on 6 meters once you've un-reversed it using the ALT switch.
73 Wayne Six ---- http://www.elecraft.com > On Jun 26, 2014, at 11:34 AM, Jim Bennett <[email protected]> wrote: > > I've been using WSJT-X for JT65 and JT9 on the HF bands for several months > with my K3, along with cocoaModem for PSK31. All three modes were set up with > the rig in Data A mode and everything worked fine. I'd like to try JT65 on > six meters but I'm seeing a different display on the K3 - it was always going > into REV when I set it to DATA A. I can switch it out of REV mode easily > enough but I'm wondering why it defaulted to that? I have seldom operated on > this band and did not intentionally set it to REV. How is is supposed to be > set up for normal DATA A on six meters? > > Thanks, Jim / W6JHB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
