Mike,
I always put a dummy load on the unused antenna connector for that very
reason. Adds a margin of safety for FD and demo events.
73,
Don W3FPR
On 6/28/2014 2:47 AM, Michael Eberle wrote:
For a K3 used during Field Day, the power, compression, and mic gain
can be locked by pressing 1 from the PWR SET menu. I was wondering if
there is a way to lock the antenna selection on radios which have the
KAT2 installed? If not maybe this could be added to a future firmware
update by pressing 2 from the PWR SET menu. My concern is that a FD
operator may accidentally press the ANT button when they meant to
press ATU TUNE and switch to the unused antenna port. This may cause
half an hour or more of trying to troubleshoot the antenna.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
