On Mon, 30 Jun 2014 20:40:45 -0600, Mike Lewis wrote: > He removed the > transformer, counted the turns, removed the old wire, found some new magnet > wire of the proper gauge, rewound the toroid, and replaced both it and the > straight through portion (which had gotten pretty hot from the proximity to > the core.)
>From experience, I can tell you that it is likely that the toroid was ruined by the heat. Once you heat it, the value changes, permanently, even if you replace the wire. I cooked a few in antenna tuners back in the 80s, before I learned the cause. I'd recommend you order a replacement (probably not expensive) and replace it at your earliest convenience. Also check with Elecraft about what other parts you should check. Be sure to tell them what happened, so they can accurately estimate what issues you could have caused. Gary - AG0N ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
