Thanks for the report, Ken. I'm glad it's working well. Wayne N6KR
On Jun 30, 2014, at 1:44 PM, Kenneth A Christiansen <[email protected]> wrote: > Hi to the group. > I updated my KX3 to this "FAST-PLAY" firmware just hours before field day > started. I made 118 QRP battery contacts using the Fast-Play feature and had > no troubles with the download or the firmware. I was able to leave most of > the cables between my computer and the KX3 disconnected. I did use the KX3 to > USB interface so the N3FJP software could log my frequency for each contact. > I found by using FAST-PLAY on the KX3 that I did not have to touch the mouse > as N3FJP just kept doing what I wanted and the KX3 was handy beside the > computer. A touch of 2 buttons completed most contacts. The built in paddle > was used about twice during the entire contest. Once again thanks Wayne as I > considered this a wonderful improvement to the firmware. > > Sent from my iPad > >> On Jun 27, 2014, at 2:05 PM, Wayne Burdick <[email protected]> wrote: >> >> Several KX3 users have now tested the new "fast-play" feature (see operating >> details below), so we're making the firmware available for those who don't >> mind working with a field-test release. It'll be a great feature for Field >> Day, but you'll want to get it downloaded and tested before hand. >> >> The rev. 2.11 firmware can be found on this page: >> >> ftp://ftp.elecraft.com/KX3/firmware/beta/ >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
