Also make sure your (contest-logging?) software is not causing the problem. I had a spell, when for reasons I don't completely understand, SUB wasn't working on forty meters. By chance I disconnected N1MM, which was in SO2V configuration, and the problem went away. The problem had something to do with conflict between N1MM and a homebrew external switching scheme.
73, Hank, W6SX On Mon, Jul 7, 2014 at 6:59 AM, Mike K2MK <[email protected]> wrote: > Hi Jay, > > The most common explanation for this problem is incorrect antenna > assignment > on that band. The K3 remembers your selection per band so it is possible > that one band might have the wrong assignment. > > In a like manner other parameters are remembered per band such as filters, > NR, NB, ATT or PRE, etc.. > > 73, > Mike K2MK > > > > JAY-3 wrote > > On 20M the Sub receive dose not work.On all other bands when I turn on > the > > Sub I can hear signals on VFO B. When I try on 20M it is dead.I have > > turned > > the VFO A down so I hear nothing there and the B full volume and there is > > nothing. > > Where would I look to correct this problem. > > > > -- > > 73 > > KI4TXP JAY > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
