I recently purchased a used KX3. I want to check the menus to see if anything
has been changed by the previous owner.
Is the menu list current in the online manual dated February 2013? I know that
firmware updates have been
issued since that manual was written.
Hello Keith,
the default setting can be found in the manual auf the KX3. All other
settings are adjustment-related and not so easily changeable by chance.
You can perform parts of the adjustment by yourself but TXSNUL
adjustment for example needs a spectrum analyzer.
If the rig is working fine the settings are most likely correct. I would
reset all values to the known default values and leave the adjustment
alone or adjust only the parts that you are able of (RXSNUL, TX gain,
VFO temperature compensation).
Regards!
Sven, DJ2AT
PS: Do not forget to save your new defaults using the KX3 utility!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
