Bill I have found if i am trying to remove Cw i can use manual notch set to the signal and it seems the distortion fades away. I gave up using both auto-notch and NR on the k3
Gary Vk1ZZ K3, KX3, KPA500-FT, KAT500-FT,P3. On 29/07/2014 11:06 AM, "Bill W2BLC" <[email protected]> wrote: > Hello Sam in Ole Angelo, > > The distortion you are noticing is very real and has bothered me to no > end. It is discussed on a couple of websites, that I am sure the "experts" > will jump in and tell you all about. > > I did some research on the subject and a lot of experimentation. I > eventually found the distortion can be reduced (or enhanced if you like > being annoyed) by changing the menu values of AGC SLP. I have mine set at 6 > and it makes the warble of the ANF (Automatic Notch Filter) - far less than > the 12 default setting. Some of my other menu settings (for the arm chair > copy user) can be found at: http://www.w2blc.net/K3.htm > > I am sure others can expound upon the whys and wherefores of the software > anomaly that causes this annoyance. Suffice to say, invoking the ANF on my > other rigs does not cause distortion on received signals. > > As always, your mileage may vary. > > Bill W2BLC K-Line > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
