Hi,The first thing you will want to do is to reset the equalizer to 0 for all bands. Command: MN008;SWT53;MN255; Next you issue the following: MN008; which selects the equalizer menu, then you issue the equivalent of a tap on a button for the particular equalizer band you want. So for the 50hz band in the equalizer you would normally press the "1" button which is a SWT11; then you issue as many UP; or DN; commands you need. So to raise the 50kHz equalizer by +5 you would do the following MN008;SWT53;MN255; MN008;SWT11;UP;UP;UP;UP;UP;
For the other bands in the equalizer you can look up the SWT table in the programmers reference for the buttons 1,2,3,4,...etc. Note: Issuing many UP; commands without delays, will not necessarily always work for the equalizer. 73's Tom va2fsq.com On 7/29/14, ab2tc <[email protected]> wrote: > Hi all, > > If there is a command to *set* the RX equalizer I am unaware of it. What > would it be? > > AB2TC - Knut > > > tomb18 wrote > > Hi there is none. > > You can adjust it up and down but there is no direct command to read it. > > 73s Tom > > > > > > > > > > -------- Original message -------- > > From: Fred Jensen < > > > k6dgw@ > > > > > > Date: 28/07/2014 17:06 (GMT-05:00) > > To: Elecraft Reflector < > > > [email protected] > > > > > > Subject: [Elecraft] K3 Commands > > > > I notice in the K3 Programmers manual that there is a TE command to > > GET/SET the Tx Eq, but I can't find an equivalent RE command [or > > whatever] for the Rx Eq. Am I missing something? > > > > 73, > > > > Fred K6DGW > > - Northern California Contest Club > > - CU in the 2014 Cal QSO Party 4-5 Oct 2014 > > - www.cqp.org > > > > ______________________________________________________________ > > <snip> > > > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K3-Commands-tp7591706p7591722.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] <[email protected]> > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
