Will be good to have a set of parameters of personal configurations that don´t affect calibrations or something else and can be copied from one to another K3
I think that could be done with some parameters, right? 73, Jorge CX6VM/CW5W K3 #4077 & #7929 -----Mensaje original----- De: Elecraft [mailto:[email protected]] En nombre de Vic, K2VCO Enviado el: martes, 29 de julio de 2014 12:49 p.m. Para: [email protected] Asunto: Re: [Elecraft] Copying Configurations It would cause problems because some calibration parameters individual to each radio would be copied. So don't try to trick it into letting you do it! On 7/29/14 8:31 AM, K5HM wrote: > Is it possible to copy the config from one K3 to another? The utility > will not allow it if the S/N are different. Is there a way to bypass > that? Will it cause any problems with the target radio? > > 73, > Ron, K5HM > [email protected] > www.qrz.com/db/k5hm -- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] --- Este mensaje no contiene virus ni malware porque la protección de avast! Antivirus está activa. http://www.avast.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
