I put my KPA100 and KAT100 in a separate EC2 enclosure. This allows the K2/10 to be unhooked and taken portable. It also provides the key out jack for driving a larger amp in the shack.
Mike KI0HA On 7/31/2014 6:22 PM, Dean wrote:
My K2-10 is my backup rig. It has an internal homemade transistor amp keyer that keys the AL811H when 100 watts is needed. I would like to add the KXPA100 to have the option to fully drive the AL811H when needed, or to run 100 watts without tuning the larger amp. What would be the best way to key both amps at the same time? Any other considerations that I should know for setting up this configuration? For those that may ask, the reason I want to use the KXPA100 instead of the internal K2 amp is so the radio will still be available for qrp backpacking and such. Thanks for your help! Dean KG7MZ Sent from my Galaxy Note III ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
