Hi John, Have him have a look at K-Line Introduction and Set Up Guide (pdf) on www.ke7x.com. The basic set up for the K3-KPA500 should work for the Icom amp as well. He may need to set up the K3's CONFIG:TX DELAY to make sure the amp switches before the K3 transmits. Cheers and 73, Fred KE7X
"The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Elecraft KX3 - Going for the summit" "The Elecraft KPA500 and KAT500 - the K-Line Dream Station" Printed, coil bound copies of these are all available at www.elecraft.com PDF versions available from www.ke7x.com KPA500 and KAT500 Quick Set Up Guide: http://www.ke7x.com/home/k-line-introduction-and-set-up-guide -----Original Message----- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Huffman Sent: Sunday, August 03, 2014 8:13 AM To: Elecraft List Subject: [Elecraft] K3 to IC-2KL All - I have a friend who would like to hook his new K3 to his Icom IC-2KL amplifier. Anyone have this setup? Might you provide the specific cabling needed to make them work together? He's not wanting band tracking, just the basic setup. Thanks in advance, 73 de K1ESE John ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to fc...@ece.montana.edu ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
