You'll need to add a buffer amp, at the very least, like this: http://www.cliftonlaboratories.com/z10000_buffer_amp.htm
Normally this would be used with a softrock rather than a P3, so I haven't really looked into what else might be required to integrate and make the K2 work with the P3. 73, Matt VK2RQ > On 4 Aug 2014, at 7:06 am, Thomas Taylor <[email protected]> wrote: > > Has anyone on this list used a P3 panadapter with the K2 transceiver? Is it > directly plug compatible or does it need a custom interface/cable and where > can > that be obtained? > > Thanks, Tom KG7CFC > > -- > "To be free is not merely to cast off one's chains, but to live in a way that > respects and enhances the freedom of others." > - Nelson Mandela > > ^^ --... ...-- / -.- --. --... -.-. ..-. -.-. > > ^^^^ > Tom Taylor KG7CFC > openSUSE 13.1 (64-bit), Kernel 3.11.6-4-default, > KDE 4.11.2, AMD Phenom X4 955, GeForce GTX 550 Ti (Nvidia 337.19) > 16GB RAM -- 3x1.5TB sata2 -- 128GB-SSD > FF 27.0, claws-mail 3.10.0 > registered linux user 263467 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
