I am using my KX3 2 meter module with a small amp. The amp has a keying input, when it goes to ground it keys the amp. I have the ACC2 module/cable plugged into the ACC2 connector of the KX3. The KX3 keys the amp to xmit but it does it on all bands, not just 2 meters. The XV2 ADR write up in manual says to set it to TRN CTRL but that option does not come up in my menu? I am using the RCA connector on the ACC2 cable and not sure what the 1/8 female stereo connector is used for? The menu for ACC2 IO is now set to LO-PTT. I have spent quite a bit of time with this but not sure what to do next? I have a 222 meter transverter on XV1 but I have not checked it yet since I started using the KX3 2 meter module, once I get it working correctly I will see if the transverter still works and is keyed correctly. Any help or ideas would be appreciated. Thank you 73 Emory WM3M ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
