We just added per-band SPAN settings to the PX3 (and will later add it to the P3). We're also adding a menu setting to quantize the SPAN selections to 2, 5, 10, 20, 50, 100, and 200 kHz. This behavior would be user-selectable; the default would be continuously variable, as it is at present.
For a lot of P3/PX3 users, the combination of these two changes will result in less manipulation of the SPAN control, and will save some Fn switches for other uses. Wayne N6KR On Aug 17, 2014, at 9:45 PM, Jim Brown <j...@audiosystemsgroup.com> wrote: > On Sun,8/17/2014 7:18 PM, Fred Jensen wrote: >> I'm still working at what the "ideal" span on my P3 would be, in the NAQP >> SSB yesterday, I had it at 100 KHz and it seemed pretty good. > > I have five of the function keys programmed for different span settings. The > other three are Peak Toggle, Fixed Mode Toggle, and Noise Blanker Toggle. > > I use 2 kHz for looking at the quality of CW signals, 10 kHz for most CW > pileups, 50 kHz, 100 kHz, and 200 kHz for contesting and general operating. I > did have 20 kHz programmed, but gave that up for the NB toggle. > > Before each contest, I'll run through all the bands and set up the span and > centering. 50/60 kHz is pretty good for Sprints and state QSO parties, 100 > kHz is good for most CW contests, 200 kHz is not wide enough for some SSB > contests. > > For 6M, I set a 200 kHz span from 50.080 to 50.280. This lets me see CW, SSB, > and JT65. > > 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
