It should key the keyout line, but the amp has to be in operate mode. The K3 will not take it out if standby.
Sent from my U.S. Cellular® Smartphone <div>-------- Original message --------</div><div>From: Don Wilhelm <[email protected]> </div><div>Date:08/27/2014 15:54 (GMT-06:00) </div><div>To: [email protected] </div><div>Subject: Re: [Elecraft] K3 Tune button, does not key a linear </div><div> </div>Andrew, The manual does not say anything about activating KEYOUT for a TUNE. It does say that the K3 will transmit RF. I presume the intent is to allow you to tune a manual antenna tuner. If you need to tune a linear amp, I guess that behavior would be cumbersome, but you can always reduce the power and do a keydown to tune the amp. I don't use TUNE myself. 73, Don W3FPR On 8/27/2014 3:42 PM, Andrew Lenton (Home) wrote: > I have noticed that when I hit tune the K3 goes to TX, however, it does not > key the linear, key line, so the linear stays in standby how do I get around > this > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
