Greetings:
My K3 is on its way back to Elecraft for some needed repairs. So I have placed my TS2000 into temporary duty. I have hooked it up to the KPA500 and the KAT500 and it works very well in the transmitting mode. The problem arises when I am in receive. If the KPA500 is in the STBY mode, receiving is not inhibited at all (I get everything noise and all). When I place the KPA500 into OPER (full power), the receive signal is attenuated down about 20db. Great for reducing noise, but not so good on that rare dx station. This same condition persists when I take the KAT500 out of line. Am I missing something in the setup when I connected the TS-2000? I do have a recording of the differences between the two settings and it is certainly available to anyone who would like it to analyze. Just let me know off reflector and I will send it to you. Best regards, Jerry, W1IE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
