Thanks to all who replied! I reseated all cables and I believe the problem is corrected. I also downloaded the latest firmware just in case, so all's well with the world.
Really starting to like this little rig! 73, Mike - W0AG On Fri, Sep 12, 2014 at 9:29 PM, Walter Underwood <[email protected]> wrote: > Open it up and reseat all the cables. > > This feels like the kind of flakiness that a poor cable connection causes. > > wunder > K6WRU > CM87wj > http://observer.wunderwood.org/ > > On Sep 12, 2014, at 6:55 PM, Mike Murray <[email protected]> wrote: > > > Just received an almost unused KX3 from a friend and seem to be having a > > major problem. When first turned on, all is well and everything > functions > > as expected. After a time, it acts as though the VFO is locked and won't > > change freq., even if I change bands. It is not locked because I have > > tapped the RATE button just to be sure, but still won't change frequency > - > > the last digit just blinks. Powering down and restarting seems to work > for > > a while, but it eventually starts doing the same thing. > > > > I'm assuming it's OP error and would welcome any input as to what's going > > on and how I prevent it. > > > > Mike - W0AG > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [email protected] > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
