Tighe, Please contact customer support about your KX3 issues. I believe that is completely in dependent of your other problem -- not being able to do an image capture with the KXPA100 in-line. That is a bug we're working on. The temporary workaround for that is to set PA MODE to OFF when doing an image capture.
Wayne N6KR On Sep 30, 2014, at 10:58 PM, Tighe Kuykendall <[email protected]> wrote: > Assembled my PX3 today and turned on the KX3 which had been working fine. > Updated firmware on the KX3, KXPA100, and PX3 to the latest firmware (2.23, > 1.32, 1.11). Kx3 has been on a pretty recent firmware release from early > spring. > > Was not able to get the PX3 Utility to do an image capture if the KXPA100 was > in-line. Tried connecting my laptop directly to the PX3 and the image capture > worked. Went back to the KXPA100 in-line between the laptop and PX3 as is > shown in the manual, the PX3 Utility would see the PX3 but when I do the > image capture it fails and then the PX3 Utility reports the PX3 is > unresponsive. Restart of the PX3 is needed to get it working again. > > I Powered everything off and now the KX3 will not come on. When I try to > turn it on the 4 LED's on the front panel come on but nothing is displayed on > the main display. The only way to turn it off is to remove the power cable > and open the case to pop a battery loose. I removed all cables from the KX3 > and still the same behavior, 4 LED's and no display. I tried a Param Init as > well but that didn't help. > > Any suggestions on getting the KX3 to start or what the 4 LED's indicates? > > 73, Tighe NK4I > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
