H Yes that will work too as long as you run it stand alone. Injecting that command set during polling in a multithreaded app, needs careful checking to ensure that the right response occurs. Timing is a issue here. 73's Tom
On Oct 2, 2014 11:44 AM, dl2ki <[email protected]> wrote: > > Hi, > > when working with the "DS response string", i found an easier and faster > method to read the values from the equalizer. > > If you select an AF-band in the RX/TX EQ menu, the set value appears briefly > in the VFO-B display area. > This value can be read out with the "DB command" then. > > The "SWTxx;" command and the "DB;" command must be carried out in quick > succession. > > In the 'Elecraft K3 utility", you can for example run a macro"SWT34; DB;" > and then receive the related response string. > > This note for general information. > > 73, Wolfgang > DL2KI > > > > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K3-Eqalizer-settings-tp7593506p7593551.html > > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
