Alan has it right, my error - the ALT button swaps sidebands, REV swaps
VFOs until the button is relaeased.
Thanks for catching that Alan.
73,
Don W3FPR
On 10/11/2014 3:03 PM, Alan wrote:
> I have not tried it, but the REV button should swap sidebands
ALT button, right?
Alan N1AL
On 10/11/2014 11:58 AM, Don Wilhelm wrote:
Howard,
Yes, see the bottom of page 18 (lefty column) in the KX3 Owner's Manual.
The IM command must be sent like a CW prosign (as one character). You
can also add it to the end of CW or RTTY memories. It will be
ignored in CW mode - allowing the use of CW memories also for RTTY.
I have not tried it, but the REV button should swap sidebands and I
believe that is equal to swapping mark and space that you are asking
about.
73,
Don W3FPR
On 10/11/2014 1:11 PM, [email protected] wrote:
Is there a method to inhibit diddle on RTTY transmit on the KX3?
Also, is there a method to swap mark and space (operate backwards)
on RTTY transmit?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
