Are you actually going to climb Rohn 25 that has been up in the air for 20+ years, for disassembly? Consider taking the thing down with a crane, supporting it at the top with the crane and cut the bottom off, then lay it down with the crane. As soon as you loose the top guys there are all kinds of age-related things that can go wrong down below.
You should take this subject onto the TowerTalk reflector. 73, Guy K2AV On Mon, Oct 13, 2014 at 10:26 PM, Robert G Strickland <[email protected]> wrote: > I have to take down a 60ft Rohn-25 tower that's been up for 20 plus years. > I remember seeing a tool advertised in QST and CQ for just this purpose. It > resembled a long "lever" that was dimensioned for Rohn-25 specifically and > helped to pry the sections apart. Any leads to this "tool" would be greatly > appreciated. Thanks in advance. > > ...robert > -- > Robert G Strickland, PhD ABPH - KE2WY > [email protected] > Syracuse, New York, USA > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
