I do the same, and for the same reason. But it's not only the .ini
file that must be edited -- there's another file that defines the
various decoder settings that can be selected from a pull-down menu
or cycled through.
userpara.ini - it only comes into play if one uses the "Profiles (S)"
menu.
73,
... Joe, W4TV
On 2014-10-14 12:26 PM, Jim Brown wrote:
On Tue,10/14/2014 5:17 AM, Wes (N7WS) wrote:
I like to use lower tones (915) because I listen to the incoming
signal and the high tone drives me nuts. MMTTY defaults to 2125. If
you use profiles then it's best to edit the .ini file directly and set
these.
I do the same, and for the same reason. But it's not only the .ini file
that must be edited -- there's another file that defines the various
decoder settings that can be selected from a pull-down menu or cycled
through. I don't recall the name of that file, but like the .ini file,
it's plain text and in the same directory. There are about ten instances
of the setting that must be changed.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
