Phil,
Scroll down a bit and you will see the photos - unless you have
something lacking in the .pdf viewer in your browser - in that case,
download the link by right clicking and choose "save file as" then open
it with Adobe Reader.
73,
Don W3FPR
On 10/17/2014 11:12 AM, Phil Wheeler wrote:
Oh no -- I'm not yet done with my K1, it appears.
I wondered why the pdf file below showed no photos with the mounting
of the board in the K1; then I read "For the time being it is working
perfectly while wrapped in bubble wrap!" :-)
73, Phil W7OX
On 10/17/14, 7:21 AM, Don Wilhelm wrote:
Joe,
I have not tried it, but Davbe G4AON has written a paper on his
installation. You can see it at
http://www.cumbriadesigns.co.uk/images/X-Lock%20K1/X-Lock_K1.pdf.
It looks straightforward enough to me. I would think you would have
to adjust the VFO range after installation, but that is easy enough
to do, just change the turns spacing on L1.
There are several reviews on eHam -
http://www.eham.net/reviews/detail/8437
73,
Don W3FPR
On 10/17/2014 9:48 AM, Joe W2KJ wrote:
Howdy fellow Elecrafters.
Would like to get in contact with anyone out there who has
interfaced a Cumbria Designs X-Lock VFO stabilizer with a K1.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
