Dave,
I suspect he is having problems with the Trnasmit Carrier Null. That
procedure is normally done at the factory since it needs a spectrum
analyzer to do it correctly. If he has access to a spectrum analyzer he
should ask support to send the complete instructions. See page 34 in
the manual.
73,
Don W3FPR
On 10/18/2014 9:14 PM, [email protected] wrote:
My brother, W8TXT, has a problem with his KX3. In PTT, when he presses XMIT, the KX3 puts
out 3 or 4 watts with the cw key still open. When the closes the CW key it puts out 10 to
12 watts and stays at that level. In LSB, he hits PTT and gets the same 3 to 4 watts out
without an mic audio. Sometimes the KX3 power out on the display agrees with his watt
meter. At other times he does not see any power out indication on the KX3 display. In VOX
he gets the same results however, he does see a quick "High Current" message
flash up very quickly on the display when he keys it. Any ideas would be greatly
appreciated. TNX es 73, Dave N8AG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
