Gene,
Do you have the correct antenna input selected? ANT1/2 if the KAT3 is
installed, or RX ANT if the KXV3 is installed. It sounds like you may
have the RX ANT selected rather than the main antenna. That is a
per-band setting, so it would only be a "problem" on one band.
73,
Don W3FPR
On 10/20/2014 7:09 PM, Gene wrote:
I have noticed that signals on 40 meters do not appear very strong on
my K3. The audio and signal strength is very low. Other hams in the
area hear signals S9 +5 while these only register S1 at best on the
K3. Antenna type and height are almost identical as I have.
Attenuator is not on and noise reduction has minimal effect. Turning
up the RF gain does not help. Signals on other bands seem to be
normal. Has anyone experienced this?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
