I also installed the 2m module without incident. It doesn't work so well if you have dual watch enabled in FM mode though -- it's not really a valid use case, but if the user ends up in that configuration inadvertently, it may leave them wondering why they can't key up a repeater.
73, Matt VK2RQ > On 22 Oct 2014, at 9:07 pm, Barry Middleton <[email protected]> wrote: > > Hello, > Just have to say that the installation of the 2 metre module in my > KX3 went very smoothly, even these 78 year old hands managed the mini co-ax > connectors. However when it came to upgrading the firmware I had a small > problem, the MCU 2.23 installed with no problem, but Mr Murphy stepped in on > the DSP 1.30, in the middle of loading I suffered a power cut, it didn't like > that one bit. Still after the power returned all went smoothly. The > sensitivity is far better than my other 2 metre rigs, so thank you Elecraft > for a first class product. > > 73 de > > Barry k Middleton G4DBS > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
