You could possibly have reversed the RF in and out cables. I did this
the first time I tested my homebrew 4CX1000A amplifier. Worth checking.
On 1 Nov 2014 18:03, Steve Lett wrote:
I just purchased the entire K line. I have the K3, P3 and KAT500 working
just fine. I cannot get any power through the KPA500. It switches bands and
it appears to be okay. But when I push the foot switch on my K3, the K3
transmits but the KPA500 is not producing any power or SWR. I must be
missing something. Do I need to change any of the default settings on the
KPA500 menu? On the back of the amplifier, I have the antenna in and out
connected as well as the 9 pin cable from the AUX on the amp to the AVP on
the KAT500. Thank for your help.
Steve, KB3TAW
--
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
