Hello Bob,

I would like to thank YOU for your trip to 4W. I was down to my last 4 zones needed on 80M and putting you in the log recently took that number down to three zones left. Fantastic job with an HF9V for sure! You had a very good signal on 80M.

The best part was a confirmation on LoTW within a few hours of working you.

Now if I could talk you into going to zone 22,23, and 24???


On 11/2/2014 12:59 AM, Bob Henderson wrote:
I want to acknowledge the superb performance of my K3, KPA500, KAT500 combo
along with my little HF9V while away on my solo 'man in a tent' trip to
Timor-Leste.

The nominal 220V supply in T-L rapidly ranges +/-20% when it is available
at all  This would be a challenge for any equipment.  Aside from occasional
60V high/low faults reported on the KPA500 everything worked faultlessly.

System integration was perfect providing for instant pre-tuned band changes
day and night.  15,200 Qs over 10 days CW only.  I'm sure to have worked a
lot of Elecrafters.

K3, KPA500, KAT500 really is the combo of choice for fly-in fly-out
DX-peditioning.

Thanks to Elecraft for some first class equipment.

73 Bob, 5B4AGN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]


--
73,

Gary K9GS

Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032   http://www.cwops.org

************************************************
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to