I'm debugging some communication issues between Writelog and K3 when the
RS-232 connection is routed through my power amp. Things mostly work,
but intermittent errors. Can someone please advise correct (or
preferred) Writelog settings? It would be a big help to eliminate
possible cockpit error.
Here's what I have:
Writelog > Setup > Ports > Port setup tab
Set correct COMx port number & select CW button.
Rig type = Elecraft K3
Baud rate = 38,400
Poll? [check box - what does it do?]
Comm PTT = YES or NO or SYNC [what does this mean?]
All Mode PTT on RTS? [check box - what does it mean?]
DVK type = Windows sound board
CW keyer type = PC generates
Writelog > Setup > Ports > CW PTT tab
PTT Control (CW mode ONLY) = {None; Command rig on COMM port; On LPT
pin16/COMM RTS} [Pls explain?]
PTT to CW delay = 0 msec
CW PTT Tail = grayed out
Thanks & 73,
Josh W6XU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
