That worked! Thanks!
jim ab3cv On Mon, Nov 10, 2014 at 12:13 PM, Paul Saffren N6HZ <[email protected]> wrote: > Hi Jim, > > The first thing to try is to perform a parameter reset on the P3. With the > P3 on, hold down the MENU and PWR keys. Note, this will reset any function > keys you may have set up. > > The frame rate will slow when the span is very narrow. For example at 2 > KHz > span, the frame rate will slow substantially due to increased sampling. > > If you're still getting slow frame rates, after trying the above, please > contact Elecraft Customer support at k3support at elecraft dot com > > 73, > > Paul > > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/P3SVGA-Frame-Rate-tp7594490p7594530.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
