Yes. He had trouble with the driver installation. He used to recommend the E-MU 0204, which I have never managed to get working for the same reason.
YMMV, Byron N6NUL On Tue, Nov 11, 2014 at 8:59 PM, Phil Wheeler <[email protected]> wrote: > Interesting that the Tascam (assuming it's the same model) is not > recommended here > > http://www.telepostinc.com/soundcards.html#Table > > Phil W7OX > > On 11/11/14 8:26 PM, Byron Servies wrote: > > FYI, > > The current high end Tascam is the US 366 and there is a $50 rebate through > the end of the year, so it is $149.99 from just about everywhere (B&H is my > favorite, too). > > 73, Byron N6NUL > > On Tue, Nov 11, 2014 at 8:07 PM, Jim Brown <[email protected]> > <[email protected]> > wrote: > > > On Tue,11/11/2014 4:08 PM, David Orman wrote: > > > I have a Native Instruments Audio Kontrol 1 which > works much better, but it is USB powered (it seemed to be indicated this > was a no-no for best decoding in digital modes in the other thread). > > > Not necessarily -- the problem with the SignalLink is that it's done > badly. Both of the units I recommend are USB powered. In the pdf, I > described how I tested. If you run JT65 and regularly see decodes in the > range of -20 and have no issues with hum, buzz, or RFI, your unit is > probably fine. > > > -- - Northern California Contest Club - CU in the Cal QSO Party 3-4 Oct 2015 - www.cqp.org ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
