Jorge,
Interesting enough, at a recent club meeting, the presentation was on using the 
SignalLink as an interface between your radio and computer to operate Winmore 
using RMS Express.   Until reading all the threads the last couple of days, I 
was contemplating purchasing a SignalLink;  however, last night I tried hooking 
my K3 directly to my computer.
All I did was connect the line out on the K3 to the mic in on the computer 
(using a stereo cable) and the line in on the K3 to the headphone jack on the 
computer.   Only thing missing was a way to key the K3.   This is easily solved 
by using the RS-232 port on the K3;  hook the K3 RS-232 port to your computer 
(since my computer does not have a RS-232 port, I used a RS-232 to USB dongle). 
 First go to the config menu in the K3 and find "PTT -- Key";  set either DTS 
or RTS above "PTT" to on.   Now open RMS express; in the setup there is a "PTT 
Port (optional) setup.  Just selected the correct serial port (found in control 
panel/device manager), baud rate you selected in the K3 config menu, and use 
either RTS or DTS for keying (the same as you set in the K3 config "PTT --Key" 
setting).
Fired everything up, set the Line out gain (I found 3 to work fine), then go to 
menu and select "Line In" and set the mic gain to an appropriate level (4 
worked for me); that was it, and I was able to establish Winmor connections on 
80 and 40 meters.
Dick,  K8ZTT
      From: Jim Brown <[email protected]>
 To: [email protected] 
 Sent: Tuesday, November 11, 2014 1:07 AM
 Subject: Re: [Elecraft] Signalink and K3
   
On Mon,11/10/2014 1:00 PM, Jorge Diez - CX6VM wrote:

  I am to buy a signalink and want to know which is the best way to 
connect it to the K3 so I can order the right cables

Don't waste your money on it, Jorge. One of the Tascam units is far 
superior, and about the same cost. http://k9yc.com/USB_Interfaces.pdf

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
":"S


  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to