Great work Dave!  That's terrific.

Brian KB1VBF

Sent from my iPad

> On Nov 27, 2014, at 5:02 AM, David Anderson <gm4...@yahoo.co.uk> wrote:
> 
> For decades I used a homebuilt LED shack clock using a GI clock chip 
> AY5-1224. It used the mains frequency for time keeping so the long term 
> accuracy was good.
> 
> Recently it became faulty and I could not get a replacement chip, so I 
> decided to build something similar but more modern.
> 
> (I do have a clock that is synchronised to 60KHz MSF but it is local time 
> only, not UTC).
> 
> I wanted something that would just give me auto setting, choice of UTC or 
> Local time with auto DST.
> 
> A bit of overkill for a 4 digit shack clock, but I used an Arduino, a GPS 
> module, and an IR controller to switch modes etc.
> 
> I did try it without the GPS conditioning but the RTC I had was very poor and 
> even with calibration routines was less accurate than my old mains frequency 
> clock, so I went for GPS which gave me auto setting as well.
> 
> Nobody in their right mind would probably want to duplicate it, but anyway I 
> put the details on:
> 
> http://sourceforge.net/projects/arduinoledgpsclock/
> 
> Still to put it all in a box, but it works great.
> 
> Full disclosure: I am a time nut! ;-)
> 
> 73
> 
> David Anderson GM4JJJ 
> 
>> On 27 Nov 2014, at 00:25, Bob <wb4...@gmail.com> wrote:
>> 
>> I built my own 24 hr dual zone station clock.  It uses a WiFi link to keep
>> synchronized time.  Never have to set it and always accurate.
>> 
>> Details:   http://wb4son.com/wpblog/?page_id=716
>> 
>> 73, Bib, WB4SON
>> 
>> 
>> 
>> 
>>> On Wednesday, November 26, 2014, Ken G Kopp <kengk...@gmail.com> wrote:
>>> 
>>> I have a couple of JAMECO kit 24 HR clocks with 1" 7-segment red display.
>>> They aren't WWVB-synched.
>>> 
>>> 73
>>> 
>>> Ken Kopp - K0PP
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net <javascript:;>
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to wb4...@gmail.com <javascript:;>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to gm4...@yahoo.co.uk
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to b.den...@comcast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to