> Ok more detail. If I set Tune power to 30w and then press Tune, then with the > KAT500 in manual it will tune down to 1.2:1. HOWEVER, if I leave it there > with the tune power on,the KAT 500 starts showing 1.2, three seconds later, > an bunch of relays click, the power SWR scale lights up, the fault line comes > on. Then all of a sudden, it is steady again. Shows 1.2:1.. Three seconds > later it all repeats. Now if I do it with CW, same thing is happening > although it's more difficult to see what's going on due to the intermittent > signal.. So it's something with the KAT500 and the antenna. But, voice is > perfectly fine! >
> > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
