A friend is using my K3 while his is in the shop When he transmit's on the K-3 running a specific power out he notices that the power especially on RTTY will start at a lower output that what was dialed in and gradually raise its output to the maximum dialed in. This seems to be worse on 15 m. It only appears to happen once then will not repeat on same freq. So if a specific power like 100W is dialed in watching his W-2 watt meter the power may start at 60 watts then ramp up to 100 watts usually on RTTY. Any ideas. Thanks Hugh W4DRH
THANK YOU for deleting my address, any other addresses, and personal information, from this e-mail, if you plan to forward it. THANK YOU also for using "Bcc" instead of "To" and "Cc" when initiating both individual and group e-mails. This helps prevent spammers, hackers and radicals from obtaining addresses, and thus the proliferation of spam. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
